Why We Why We Ghost Immobiliser 2 And You Should Also

Ghost Immobiliser 2

Protects your vehicle from key cloning and stops thieves from driving it using the keys you originally had. Our latest immobiliser is connected to your vehicle's CAN data network and a unique PIN must be entered to start the engine.

Ghost, unlike trackers, doesn't emit radio frequency signals and cannot be detected by diagnostic tools. Ghost does not have LED indicators or buttons to indicate its presence in your van or car.

Anti-key Cloning

The Ghost immobiliser was developed to stop key cloning. This device is connected to your vehicle's data network CAN and creates an unique pin code using the factory buttons on your dashboard and steering. This prevents the thief from being able to start your vehicle. If the wrong PIN code is entered, the engine will not be started which makes it impossible for them to drive away with your joy and pride.

Ghost immobilisers are new technology that is extremely difficult for thieves to beat. The ghost immobiliser unlike physical deterrents, like wheel locks and steering locks that are able to be cut, is a discrete electronic device. It's not even identified by thieves since it emits no radio signals and operates silently.

This next-generation immobiliser will protect your car from a variety of threats, including key hacking relay attacks, key-hacking, and cloned copies. It is also able to prevent thieves from adding the new key or replacing your ECU in the sense that it will not allow the car to start without entering the correct PIN code before entering.

The ghost immobiliser 2, unlike other immobilisers, it does not require the use of a remote control or key fob to operate. It is able to be deactivated from the driver's phone by using a simple app. This makes it perfect for the times you need to hand your car over for valet parking or maintenance without the key fobs.

The Autowatch Ghost-II represents the latest evolution of Ghost immobiliser. It is designed to be as easy and convenient to use as possible, but remains as secure as ever. This is achieved by linking the ghost installation near me-II with the vehicle's CAN data network, which means there aren't any wires that could be concealed or easily found. It has built-in features that allow users to disable the ghost alarm installation-II simply by connecting it to your vehicle's Bluetooth.

OBD port hacking

OBD port hacking is a new technique employed by professional car thieves to steal cars. Thieves have access to your vehicle's OBD port with no more than an laptop, an app and a few cables, which can be purchased on the internet for less than PS50. Once they have access to your vehicle's OBD port, they will be able to do whatever they want including changing fault codes and tuning your vehicle to stealing your pride and joy in less than a minute.

It can prevent your car from being taken away by requiring a unique PIN sequence to be entered in conjunction with your key fob before you can start the engine or leave. It does this by communicating with the vehicles ECU (Engine Control Unit) via the CAN Data circuit, and is completely undetectable to any code grabbing or RF scanning technology. It also has a Service/Valet Mode that allows your vehicle to start with no PIN code.

To utilize an OBD hacking device you need to have a laptop that has software capable of reading the OBD protocol, which is available for less than PS100 on eBay or Amazon. You will also need a cable with OBD pins which are connected to the CAN bus. These can be found on Amazon/Ebay for around PS50. The cable must be connected to the wiring harness of your car, such as the radio wiring harness.

Once the hacker has established a connection to your vehicles OBD port, they will send diagnostics to the system at a high baud rate which will crash the CAN, and prevent systems within your car from working. This could cause your car's engine to stop or lock up.

No remotes or keys required

A car immobiliser is great piece of anti theft technology that is used by millions of modern vehicles around the globe. An aftermarket immobiliser safeguards your vehicle through the use of engine ECU software that prevents cars from starting if a false transponder is transmitted.

However, it could be easy for thieves to circumvent an immobiliser system if they have access to the code to deactivate it. A burglar can easily remove the battery from most key fobs by removing them. They could then use a simple tool in order to take out the internal circuit board from an immobiliser and replace it with blank. Then, they'll be in a position to start your vehicle.

The TASSA approved Ghost 2 is an immobiliser that does not require any additional keys or remotes. The immobiliser is directly connected to the vehicle's ECU (Engine Control Unit). This is accomplished via a discrete, quiet data loop in CAN that cannot be detected by diagnostic tools, such as the ones used by high-tech thieves. It doesn't come with a traditional keyfob that has an LED indicators, so it's not visible.

There will be occasions when you need to deactivate Autowatch Ghost 2's automatic security for instance, during the valet parking or servicing. Ghost CAN immobilisers have a mode called "Service Mode that you can activate with the push of a button on your phone. The car can still be operated, but the maximum speed is limited to 36 mph.

If you'd like more information about the TASSA accredited ghost immobiliser, please contact us today to arrange an appointment in our workshop. A member of our team will explain the process, and give you your Ghost 2 emergency card, installation certificate, and security assurance.

Simple process to change the PIN code

ghost immobiliser fitter (mouse click on rvolchansk.ru) is a next generation device that protects your vehicle without cutting wires or installing aftermarket key fobs. It is directly connected to the vehicles CAN data network and a unique PIN code is programmed into it via buttons on your steering wheel & dash. The device doesn't emit RF signals, so it is unable to be manipulated. This makes it difficult to be detected by sophisticated RF scanning and code grabbing techniques that are used by modern thieves.

The PIN code sequence can be altered anytime you want to lock out previous drivers and even includes an override code in the event of forgotten sequences. The installer will show you the process to do this during installation. The system also includes the option of a valet mode that can be used to temporarily disable the pin input sequence so that your mechanic or garage can fix the vehicle without needing to know the pin code. This is a great choice for customers who don't want their pin number to be divulged, but want to leave their car with valet parking or service.

Ghost is an unobtrusive system that utilizes the buttons on your car to create an unique and interchangeable PIN sequence. This sequence is entered via the smartphone application. There are no additional LED indicators are thrown out, and your vehicle will be protected without any chance of being disabled.

Every vehicle is tested

local ghost immobiliser installer immobilisers, unlike key fobs that require pressing buttons, is discretely installed under the dash or on the steering wheel. Only you will know it's there. The device is connected to the car's CAN data networks and an individual PIN code is programmed into it using existing buttons on your car. The system won't allow your car to start until the code is entered. This means that thieves are unable to duplicate the keys of your vehicle or gain access to the OBD to hack into it.

Ghost is a great option for all vehicles including electric cars motorhomes, vans, motorhomes and bikes. It is also extremely versatile and can be programmed to turn off in various situations. For example, it can be set to enter Valet mode when the vehicle is transported to a valet parking or servicing company. This means that your vehicle can be operated within a set 30mph speed limit, and the ghost immobiliser will reactivate itself when it is returned to your property.

The device can also be reset at any time to your personal PIN code. This is a great option if you lose the code, or in the event that the device becomes unusable.

It's also important to note that the device is completely inaccessible to those who aren't familiar with it. It does this by analyzing the buttons on your steering wheel and dashboard and analyzing the data they send in order to identify the button that was activated. This makes it a completely secure and reliable security option that can't be tampered with by jamming, RF scanning, or door lock pick sets.