Ghost Immobiliser 2 Explained In Fewer Than 140 Characters

Ghost Immobiliser 2

Protects your vehicle against key cloning and prevents thieves from driving the vehicle using original keys. Our most recent immobiliser is connected to the CAN data network in your vehicle and a unique PIN has to be entered in order to start the engine.

Unlike trackers Ghost doesn't transmit any radio frequency signals and cannot be detected with diagnostic tools. Also, it doesn't have any LED indicators or buttons that can give the impression that it is in your vehicle or van.

Anti-key cloning

The ghost immobiliser was designed to combat key hacking and cloning. This device connects to the CAN data network in your vehicle and generates an unique pin code push sequence using the factory buttons on your dashboard as well as the steering wheel. This stops the thief from being able to start your car. If the incorrect PIN is entered, it will stop the engine from starting, making it impossible to drive off with your pride and Joy.

Ghost immobilisers employ a new technology which is extremely difficult for thieves to beat. In contrast to physical deterrents such as wheel locks and steering locks which can be cut or jacked the ghost immobiliser is a discreet electronic device that isn't detected by common thieves since it doesn't emit any radio signals and operates in a silent manner.

This next-generation immobiliser will protect your vehicle from a range of threats, including key hacking relay attacks, key hacking and duplicate copies. It can also stop the thief from adding an additional key or replacing your ECU by ensuring that it does not allow the car to start without entering the correct PIN code before entering.

The ghost immobiliser 2 unlike other immobilisers, does not require the use of a remote control or key fob to operate. It can be turned off via the driver's mobile by using a simple app. This is ideal for those times when you have to hand your car over for valet parking or servicing without the key fobs.

The Autowatch Ghost-II represents the latest version of the ghost installers near me immobiliser. It was designed to be as simple and user-friendly as possible, but remains as secure as ever. This is achieved by linking the Ghost-II into the vehicle's data network CAN, which means there are no wires to hide or easily found. It also comes with a built-in feature which allows users to disable the Ghost-II simply by connecting to your vehicle's Bluetooth.

OBD port hacking

OBD port hacking is the latest technique used by professional car thieves. Thieves have access to your vehicle's OBD port with nothing more than an laptop, an app and a few cables that can be purchased on the internet for under PS50. Once they have access, they can do anything they like, from resetting your vehicle's fault codes, tuning your vehicle, or stealing it within a matter of minutes.

If you have a ghost immobiliser fitter immobiliser installed, it will protect your vehicle from theft using this method, by requiring that an unique PIN code sequence is entered into the fob of your key in order to start the engine and then drive away. It does this by communicating with the vehicle's ECU (Engine Control Unit) via the CAN Data circuit, and is completely undetectable to any RF scanning or code grabbing technology. It also has a Service/Valet Mode that allows your vehicle to start without the PIN code.

You'll also require cables with OBD pins, which are connected to the CAN bus. These cables can be found on Amazon/Ebay for around PS50. You'll also require cables with OBD pins that are connected to the CAN bus. These are available on eBay and Amazon for about PS50. Then, you need to splice the cable into the wire harness of your vehicle for tracker example, the radio wiring harness.

Once the hacker has established a connection to your vehicle's OBD port, they will send diagnostics requests to the system at a high baud rate that can crash the CAN and stop systems inside your car from functioning. This can cause the engine to stop and doors to lock, or even the brakes to be engaged.

No remotes or keys required

The car stolen with ghost immobiliser immobiliser is a great piece of anti-theft technology that is utilized by millions of modern vehicles all over the world. An aftermarket immobiliser protects your vehicle by using engine ECU software that prevents vehicles from starting when an untrue transponder signal is sent.

However, it can be easy for a thief to bypass an immobiliser system when they have access to the code that allows them to disable it. The battery inside most key fobs can be easily removed by removing it which means that a burglar could make use of a simple tool to take out the immobiliser's circuit board and replace it with an empty. They will then be capable of starting your vehicle.

With the TASSA approved Ghost 2 immobiliser, there are no additional keys or remotes needed. The immobiliser connects directly to the vehicle's ECU (Engine Control Unit). This is done via a discrete, quiet data loop in CAN that is not detected by diagnostic tools like those used by high-tech thieves. It doesn't include a traditional keyfob, which has an LED indicator, so it is invisible.

It is possible to disable autowatch ghost 2 immobiliser's Ghost 2 auto protection at times like during valet parking or during a service. The ghost CAN immobiliser has a special mode to do this, referred to "Service Mode which can be activated with the touch of the button on your smartphone. The car can still be operated, but the maximum speed is restricted to 36 mph.

If you'd like more information about the TASSA certified ghost immobiliser, contact us today to arrange a demonstration in our workshop. A member of our team will run through a full breakdown of the system's operation and provide you with your owner manuals, installation certification, Ghost 2 emergency card and security assurance.

Simple PIN code Change Process

Ghost is a next generation device that secures your vehicle without cutting wires or installing aftermarket key fobs. It is directly connected to the vehicle's CAN data network. A personalised PIN can be programmed using buttons on the steering wheel and dash. The device doesn't emit RF signals, therefore it cannot be bypassed. This makes it inaccessible to sophisticated scanning or code grabbing technology that modern thieves employ.

The PIN code sequence can be altered anytime you want to lock out previous drivers and even includes an override code in the event of a sequence that is not remembered. When installing, the installer will demonstrate how to do this. The system also has the option of a valet mode that can be used to temporarily disable the pin input sequence so that your mechanic or garage can repair the car without needing to know the code. This is a great option for those who don't want their PIN sequence to be disclosed, but would like to leave their vehicle with valet parking or service.

Contrary to Thatcham products that require additional key-fobs to operate, Ghost is a discreet system that uses the buttons on your car to create a unique interchangeable PIN code sequence. This sequence is entered via the smartphone application. There are no additional LED indicators are thrown out, and your car will be protected without any risk of being disabled.

Tested for every vehicle

In contrast to key fobs that require you to press buttons, a ghost immobiliser is discreetly installed under your dash or steering wheel so that only you know it's even there. The device is connected to your vehicle's CAN network and a PIN code can be programmed by using the buttons on your vehicle. The system won't allow your vehicle to start until this code is entered. This means that thieves can't duplicate the keys on your car or gain access to the OBD port to hack your vehicle.

Ghost can be fitted in all vehicles including electric vehicles, motorhomes, vans and bicycles. It's also extremely versatile and can be programmed to shut down in various scenarios. It is possible to program it to go into Valet mode, for example when the vehicle is transferred to a valet service or parking company. This means that your vehicle can be operated within a pre-determined 30mph speed limit. The ghost immobiliser will be activated when it returns to your home.

The device can also be reset at any time to your personal PIN code. This is a great option if you lose the code or when the device ceases to function.

It is also unnoticed by anyone who doesn't know what it is. It does this by running through the buttons on your steering wheel and dashboard and then using the information it sends to determine the button that was hit. This makes it a safe and solid security system that is not able to be altered by RF scanning, jamming, or a door lock pick set.