Five Saab 9-3 Key Replacement Lessons Learned From Professionals

How to Replace the Replacement Key Battery For the saab key replacement near me 9-3

Saab owners must follow a set of special steps to install an additional ignition key. This requires a handheld computer, called Tech-2 which is used by the dealer. Then a new key as well as transponder have to be purchased and programmed to the car.

Rotate your keys to stop one from wearing out faster than the other. This will help to keep your keys in perfect condition.

Replacement Case

In contrast to the traditional saab 9-3 key programming keys of the past keys, the latest keys have electronic components which makes it hard to duplicate. This has made stealing cars considerably more difficult than it was years ago. It also makes it more costly to replace keys that were lost.

Saab 9-3 owners must have two keys that work. It is expensive to replace a lost key because it requires replacing the CIM module, and reconfiguring the locking cylinders. Dealers charge between $100 and $200 for this.

There are ways to reduce the high cost. Some parts retailers can look up the code from a spare key (usually the same one that opens the doors and switches the ignition) and cut a brand new key blade out of metal for a fraction of the dealer's cost. The key must, however, be identical to the original one to function properly in your car.

Follow these steps to replace the case. You'll need a flathead screwdriver as well as some patience. With the screwdriver, slowly pull the plastic apart and remove the emergency key from the case. Once the case is open, remove the electronic components and put them back into your new case. Place the key with the correct badge inside the case.

Replacement Battery

The saab ignition key 9-3 replacement battery is a low-cost part that can be easily and quickly replaced. This YouTube video by Cyclone Cyd shows how to replace the remote fob battery in just four steps. This tutorial is compatible with any modern Saab key fob. However, the procedure might differ slightly.

This button is usually located next to the Saab logo on the back of the fob. This button is usually located just below the saab 93 key replacement logo on the back of the fob. Use a flathead to insert the screwdriver into the small hole on this button. This should be sufficient to open the case in order to change the battery.

Once the new CR1632 battery is installed it is possible to reassemble the remote key fob. You can then program it to your car. The entire process should not take more than one hour. It's a simple procedure that doesn't require special tools.

The process is a bit more complicated if you've lost your key, but it's possible. The dealer will first need to read the VIN of the vehicle and then order the replacement TWICE module as well as key blade with the correct unique code. Then, they'll be required to cut the replacement key and then program it with the latest software tool known as MDI.

Replacement Key Fob

The key fob is the part that locks and unlocks your car, it's got a battery within. Batteries have a finite lifespan and will eventually die. It is a common problem for all vehicles. The good news is you can change the batteries in most key fobs, and not have to replace the entire case. Amazon sells replacement fobs with all the electronic components in place. You can simply remove the case and replace the batteries. It is necessary to remove the emergency key before you replace the batteries. To do this, place a small flathead screwsdriver into the slot that is in the middle of the. Move the screwdriver around the case, and it should split open, making it easier to remove.

When you are ready to replace your keys, make sure you have a spare, because this can cut down the total cost by a significant amount. If you have a spare you can ask the dealer to cut the new key and program it into your car, which is cheaper than replacing the whole key fob.

If you don't have a spare car key, you can add an additional key to your car, however this requires a lot of research and effort. The cost for adding a second key is several hundred dollars and also requires programming of the car's computer. This can be accomplished by a professional, however it's a costly choice for most owners.

Replacement Ignition

Contrary to earlier Saab cars, the modern SAAB 9-3 models use an upgraded alarm system that is dependent on a coded keys. If you lose your primary key, it can be costly to purchase a new one since the car must include a computer and also be programmed to accept a brand new key. Locksmiths typically aren't able to program this and dealers can charge several hundreds of dollars just to program the new key!

Dealers will charge you top dollar to replace your car computer (also called the CIM or SAAB twice) If you lose your only working key. Instead we can reprogram the EEPROM of your current car computer to allow it to be programmed to accept a second key, and save you over 50% of what you'd be charged at a dealership.

If you've owned a 9-3 from SAAB for many years you are aware that the ignition keys are not very durable. If the ignition key you have isn't working properly, you should look into replacing it. They can become extremely sticky and the buttons are known to fall off. It's not so difficult as it may seem to replace the ignition key. With the right tools, it is able to be accomplished quickly.