10 Quick Tips About Fiat Panda Key Fob Replacement

Reasons Your fiat panda key 500 Key Fob Won't Work

A key fob for the fiat 500 keys 500 is a handy way to unlock the doors and get started the car. There are a variety of reasons why the fob won't work. These include a dead battery, damaged receiver module, water damage issues, and interference.

This listing is for an NEW replacement key for fiat ducato van Fiat Flip Key Remote - an exact replica of the Ilco brand that needs to be programmed professionally by a local locksmith (click here for Locksmith Search). Includes lock, unlock, and trunk buttons.

Dead Coin Battery

The most frequent reason why your 500 key fob won't function is a dead battery. Modern key fobs have a limited operating range, and must be within some feet of the vehicle in order to function. If you are far from your vehicle and you push the keyfob button it will not respond, and display the message "Key Fob Not Detected".

If this happens, replace the coin cell battery (Part number CR2032) by a new one from a reputable brand such as Panasonic, Duracell, or Energizer. They are available at the local hardware store or on the internet.

After you've changed the battery on the coin cell, you can test it by standing close to your fiat key replacement near me 500 and pressing the buttons. The parking lights will flash and the key fob should operate the lock and unlock switch.

If your key fob still doesn't work even after replacing the battery, there may be water damage that hinders it from connecting to the module inside your vehicle. Water damage can happen in a number of ways, ranging from small splashes to submerging the fob in salt water at the beach. If you suspect that your fob was exposed to water, try placing it in a dry rice bag to pull the moisture back out. If this fails, you'll need to have the fob reprogrammed either by an auto locksmith or a dealer.

Water Damage

Damage to the water supply can occur if you immerse the fob into the ocean, or wash it in a machine. Saltwater is particularly dangerous to the circuit board of the fob that can cause it to short out and eventually die. The fob getting wet is not an ideal idea but if you accidentally drop it into an empty cup of water, or forget to take it out of your pants pocket before running the washer and you don't have a chance, don't give in.

Take the battery off first. Clean the electronic chip using isopropyl alcohol or another similar product and then dry it thoroughly before replacing the battery. Then, test the fob to see if it works. If the key isn't working, it may need to be changed. This is usually done by an auto locksmith or dealer.

If the key is a newer model and hasn't been programmed to your car It will most likely need to be replaced completely. A professional locksmith for automotive can complete this simple process. The locksmith will require the key cut to match your vehicle's ignition. They'll also need to reprogram the fob in the system of your car. This is a cost-effective and quick procedure that can be completed within the same day.

Receiver Module Issues

One of the main reasons why your 500 key fob could stop working is that it's simply out of range. The remote usually has a range of 30 feet or less and if it's far away from your car it will not respond to your commands. This can be fixed by moving it closer to your vehicle until it starts responding.

If your fob doesn't work after replacing the coin battery, also known as a "button", "watch" or "button" It could be due to an issue with the internal circuit board. Reprogramming the fob typically resolves this issue. You can find directions on how to do this on the majority of vehicles by searching YouTube or checking out the owner's manual.

You may have to replace the metal retaining clips that keep the coin battery. If they loose tension, it can prevent the battery from being properly seated and can cause your remote to malfunction.

In rare instances, the fob can become out of the vehicle's sync because of hardware or software issues. It is possible to fix this issue by visiting your local auto-locksmith or dealer to reprogram your key fob. In some cases the software might need to be reinstalled in your body control modules.

Interference

Interference can also cause the key fob to not receive or transmit a signal. This may happen if the keyfob is located in close proximity to a radio transmitter, such as a cell phone or radar detector. The key fob could not function because of a weak connection with the buttons water damage or damage to the internal chips.

If your key fob suddenly stopped working, or if you have tried everything at home to solve the issue (e.g. replacing batteries, reprogramming or using the spare key fob, it could have a damaged receiver module on your 500. The receiver module is located under the dash and is able to pick up the radio frequency signals from the key fob. It converts the signals into electronic commands, which are then read by the vehicle.

Fortunately, there's an easy method to reset every single system on board in your 500, including the key fob. Disconnect the battery 12 volt for about 15 minutes by removing the negative cable and then the positive cable. Then reconnect the battery. This will eliminate any remaining electricity and restart the car's computers, which can help you get your key fob working again. If the issue continues, you should consult an expert technician. They will be able diagnose the root of any issues.