10 Ghost Immobiliser Tricks Experts Recommend

Why You Need a Ghost 2 Immobiliser Fitting Near Me

Modern thieves can steal a vehicle in less than a minute. They make use of the OBD port of the car to hack into the ECU and then duplicate a key, all using an unprotected laptop inside the vehicle.

The autowatch ghost installers Ghost immobiliser prevents this by sending pin codes to the buttons on your vehicle (steering wheels & central console). It is completely undetectable to anyone in your car.

No key fobs or LED indicators, or any other methods of locating the vehicle are available.

The ghost immobiliser is a great method to protect against keyless entry theft and key cloning. This device safeguards your vehicle from these types of attacks by preventing the engine from running after a valid pin code has been entered. This is a great method to safeguard your vehicle. Insurance companies recognize it as a safety feature that can lower the cost of a policy.

The audi rs3 ghost installer connects to your vehicle's CAN data network. Once it is installed by Car Theft Solutions, it will only work if you enter your personal code for override and a specific button combination. This means that any attempt to start the vehicle without entering this code will be met by a loud siren and the engine won't start. The thief will then realise that they've been caught and are likely to leave the vehicle and escape.

This system has the benefit of not transmitting any signals like the tracker. Thieves can't make use of RF receivers to pinpoint your Ghost device's location. It also doesn't emit any IR (infrared) signals, like the usual remote key fobs to control the device or tracker do, making it very hard to bypass or hack.

Another advantage of the ghost is that it features the valet mode which can be activated when you give your vehicle to a valet service or parking. This will disable the immobiliser CAN for 30mph and allow you to use your vehicle just as normal by with your key fob. The Ghost will be fully functional when the vehicle is back in its parking spot.

If you'd like to learn more about the Ghost or would like us to install it in your vehicle then you can contact us at Car Theft Solutions today. We are a dedicated family owned business with more than 10 years of experience in vehicle security, including the Ghost immobiliser installation. We are an approved installer for Ghost products and our reputation is built on the satisfaction of our customers.

No hacking, cloning or modifying

The autowatch ghost installers Ghost immobiliser is one of most advanced available. It protects your vehicle from key cloning and hacking, making it nearly impossible to steal. The only way that a burglar could take your vehicle is to physically tow it away. Even then, they would not be capable of starting the engine.

This is because unlike other immobilisers that stop the vehicle from starting if they don't have your fob, this clever system actually disconnects the engine control unit so that the vehicle cannot start. It does this by sending a signal to buttons on your steering wheel or door panel, or on your central console which can only be disabled by entering the proper pin code configuration, it is this feature that makes the ghost installers near me impossible to break.

Its sleek and discrete design allows it to fit seamlessly into your vehicle with no additional keys or LED indicators It operates on its own, independent of your alarm system or tracker from factory. It also functions as a CAN bus immobiliser, which means it is part of the control area network of your vehicle and is not interfering with any other devices such as the built-in key fob or alarm.

This unique technology isn't detectable by thieves unlike other systems that use codes grabbing and RF scanning. It only sends a series of pin codes in a silent manner through the buttons on your vehicle's steering wheel or door panels, or central console. The Ghost is a revolutionary device that shields your vehicle from theft of keys that are keyless and smart key theft. It does this by generating an unique pin code which needs to be entered to disable the device.

The number of keyless entry vehicles on the road is increasing. Thieves are becoming sophisticated and employ devices to clone your vehicle that can be purchased on the internet or in classifieds under PS15. The cloned key fob can be used to gain access to the vehicle. A standard vehicle immobiliser only stops the engine from starting only if you have the original key fob, this does not offer enough security and is easy for criminals to spoof or block signals to unlock the vehicle.

Valet mode

Standard immobilisers installed to your car use an electronic chip that sends signals. The system will then look for the code that was sent by the key to begin the vehicle. If the signal isn't detected, it will cut off and prevent the engine from beginning. This is the principle behind all aftermarket car immobilisers. It's a crucial measure to prevent your car from being stolen, even if someone has your keys or a device that could increase the signal from your key fob.

A ghost immobiliser does more than just stop this. The system, which is located on the CAN Bus of your Mercedes has been programmed with a unique PIN code that needs to be entered to start the vehicle. It is then secured on your application and nobody is able to access it until they have the same unique pin number that you have.

The system will also prevent hacking, cloning and signal jamming (which could be used by thieves to get around the immobiliser in your vehicle). This means that if a thief does somehow get hold of your car keys or key fob, they won't be able to start your car even if parked within the distance of a few feet. The only way for them to escape with your car would be to physically take it away on a flatbed lorry which is extremely unlikely.

Valet mode is a useful feature that comes with your ghost immobiliser. When it is activated the glove box of your car and trunk will be locked, so that thieves will not have any personal items to carry with them. It will also limit the speed of your Tesla so that it can't be driven over 70mph, and it will also disable the ridiculous mode. It will also lock your driver profiles and hide your home or work addresses to ensure that no one else has access to the private information on your Tesla dashboard.

If you want to use your vehicle for valet parking or other service-related purposes, just select the 'Valet/Service' feature on your dashboard app and then enter your 4-digit valet pin on the touchscreen. After you've done this, the alarm functions will be disabled however it will block the ability to start your car unless a valid pin is entered. This is ideal for those who need to transfer their vehicle to others, like taxi drivers or garage mechanics.

The first aftermarket immobiliser for CAN buses

The Autowatch Ghost is the world's first aftermarket CAN bus immobiliser and provides security unmatched by anything on the market today. It safeguards your vehicle from key cloning, hacking and even key theft. It does this by utilizing your vehicle's current interface. It does not require additional fobs or remotes and instead works with the vehicle's data network, CAN. This makes it a "stealth' device.

The device is an in-built circuit board that connects to the engine management system in your car (ECU) and operates in a silent manner. When activated, it stops your vehicle from starting until a specific PIN is entered. This is a unique code that you will receive when you make an appointment for installation. This number is needed to activate valet mode, deactivate the alarm or permit you to leave in the car of a friend (if they have a Ghost installed as well).

It is designed so that it is not spotted by anyone who is looking at your car's interior. does not send any radio signals and is only heard when it's being activated. It can be put in a variety of places which makes it virtually impossible to detect. It is also low-maintenance and can be utilized in conjunction with other anti-theft systems, such as trackers (Brand dependent) for an all-inclusive solution.

Many people choose to fit an immobiliser that ghosts due to the fact that they feel standard security isn't enough to protect their pride and joy from being stolen. Physical deterrents like wheel clamps and locking mechanisms for steering wheels are excellent alternatives, but they are not considered "theft-proof" by thieves because they are easily beaten with the right tools. Ghost immobilisers are not bypassable by thieves as it is integrated into the vehicle and, if activated, will shut down the starter motor or fuel system.

ferrari ghost installer immobilisers are installed for just PS450 which is just a fraction of the price of other products. It also helps stop your vehicle from being stolen. If you're looking to add an additional layer of security to ensure that your car is secure and safe, then contact us today and we can get it booked in for you. We accept card payments and offer a 3-month interest-free credit with Klarna.