5 Landrover Keys Lessons Learned From The Pros

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they are not susceptible to rust or rot.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will save you from unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge amount of damage to your home, which can make it extremely dangerous and possibly fatal. You should take the time to ensure that your windows are in good working order.

For single pane windows it is fairly easy to replace windows, and the new one is usually able to fit into the frame of the previous one easily. If windows with double panes are held together by internal beading, it is more difficult to remove and replace the old panes. In this instance you'll need locate some plastic spacers to aid the new pane in being able to fit properly into the window frame.

If you're planning to attempt to remove the window panes by yourself it is important to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a drop cloth prior to when you start working on the glass to ensure that any fragments of glass fall onto the cloth instead of landing on the floor, where they could be trampled on and cause further damage.

Once the glass has been removed from the window, it's best to seal the gap with clear packaging tape or duct tape to block drafts and water from entering the property until a professional can come out and fix the window. This will also act as a barrier, preventing any intruders from getting access into your home. If the distance between the door and the window is substantial, you may prefer an alarm system that has windows. This will give you the best of both.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window. Over time, they can be affected by a variety of issues such as sagging. A sagging uPVC windows can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it is important to act swiftly to stop the issue from getting worse.

Repositioning the hinges could help fix a window that is sliding. First, you'll need to open the windows so you can get at the frame. After that, using a screwdriver, you can take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you have relocated your hinges. If you're satisfied with the fit of the window, tighten the screws to keep them in the right position.

If you cannot reposition the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity over time, which causes them to loosen. It is crucial to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also loosen up. This is usually due to screws that have become undone over time, but it could also be due to the mechanism of the handle wears out. It's relatively easy to repair a loose uPVC handle. First, you'll need close your window and do an experiment fit. The joint at the corners of the sash should be aligned with the joint on the casing. If it does not, you can use the screwdriver to loosen up the handle. Then turn the mechanism back into place.

3. Water Leaks

It is important to take action if awake each day to find mouldy walls and wet floors. Water leaks through windows can cause structural damage to your home and also impact your ability to regulate the temperature in your home. The most common reason for leaks in uPVC windows is that the sealant around the frame has been damaged or not present.

This is an easy fix that can be completed by any DIYer who has the ability. Depending on the severity of the problem the caulking used previously may require removal before a new layer of caulk can be put on. It is crucial to remember that when it comes to upvc window repairs - read here,, you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and reduce your energy efficiency.

Check that any drainage holes do not have debris inside them and that the sill pan has been properly angled to drain away from the window. In more serious cases you might need to consider replacing the window.

Moldy sills and rotten ones are also signs of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the home.

It is also important to remember that if the leakage is coming from between the glass of your double glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sliding. It is also possible to be fixed by a uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or it opens with a breeze. Anyone with the skills to fix them can replace these in a matter of minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that are hinged and, like all mechanical parts, they are susceptible to wear and tear over time. It is very easy to replace a hinge on a window however it is easier if someone else helps hold the frame.

It is also worth checking that the uPVC hinges are being opened and closed in the right direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The issue can be caused either by opening the window incorrectly or a faulty installation in the factory. This can often be resolved by sending us a photo via our website and we will be more than happy to give you advice.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant to the hinges is a good method to accomplish this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more smoothly. It can also prevent corrosion and reduce the possibility of sticking. It is recommended to do this once a year. WD40 and other solvent based fluids are not recommended since they will damage parts of your uPVC window repair near me.

5. Draughts

Draughts can be caused by different causes. The hinges may also become disaligned as a result of wear, causing an opening between the frame and sash. This can be easily repaired by giving them good cleaning, but when they're beyond repair, it may be necessary to have them realigned or replaced. The second is the interlock, which is located on the hinge side of the window, may also become misaligned, again it is feasible to give them a good clean, but in some cases it might be necessary to have them replaced.

The next common cause of draughts is the window seals. These are susceptible to being worn out or damaged over time, and let air escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help to regulate indoor temperatures, and reduce the risk of draughts.

One of the most effective methods to reduce the draughts in your home is to use an draught excluder. These are usually fabric tubes which are filled with a sort of filler and can be placed on top of your windowsill. They can help keep cold air out and keep your home warm and cozy!

With a little regular maintenance and repair windows made of upvc will provide a great level of security and insulation for your home. It is crucial to keep in mind that all windows will eventually become worn out, and it is cheaper to replace them than to repair them. If you have any problems with your upvc window, it's best to consult an expert as soon as you can.