Pengguna:DanaeR6466436754

How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have to follow a series of unique steps to add an additional ignition key. It requires dealer assistance using a handheld computer dubbed Tech-2. Then the transponder is replaced and a key must be purchased.

It is a good idea to rotate your keys so that one does not get damaged faster than the other. This will help keep your keys in perfect condition.

Replacement Case

As opposed to the traditional saab 93 key keys of old keys, the latest keys have electronic components which makes it more difficult to copy. This has made stealing cars significantly more difficult than it was a few years ago. It also makes it more expensive to replace lost keys.

Every owner of a Saab 9-3 key replacement 9-3 must have at least two working keys. If one of them is lost, it costs a lot of money to replace it in the car, as it requires replacing the CIM module and programming the locking cylinders. Dealers charge between $100-$200 for this.

There are options to avoid these costly costs. Some parts retailers will search for the code from an extra key (usually the same one that opens the doors and switches the ignition) and cut a brand new metal key blade at just a fraction of dealer cost. The key must be exactly the same as the original in order for it to function in your vehicle.

You can also change the case yourself by following these steps. You will need a flathead screwdriver along with some patience. With the screwdriver, slowly break the plastic and separate the emergency key from the case. Once the case is open, take the electronics out and put them back into your new case. Be sure to put the correct badge and key back inside the case, too.

Replacement Battery

The replacement battery for the Saab 9-3 is a cheap component that can be replaced easily and quickly. This YouTube video from Cyclone Cyd demonstrates how to replace the remote fob battery with just four steps. This tutorial can be used for any modern-day saab key fob however the procedure might differ slightly.

The button is normally located just below the Saab logo on the back of the fob. This button is usually located on the back of the fob just below the Saab Logo. Use a flathead to insert the screwdriver through the small hole on this button. This should be sufficient to open the fob case so that you can replace the battery.

After you have installed the batteries CR1632, it is possible to reassemble the remote key fob. Then, you can program it into your car. The entire process should not take more than one hour. This is a straightforward procedure that doesn't require special tools.

If you lose a key, the process will be more complicated however, it can be done. The dealer has to first verify the VIN of the vehicle and then order an alternative TWICE module, as well as a key blade with the proper unique code. The dealer will then need to program the key using MDI which is a new software tool.

Replacement Key Fob

The key fob comes with batteries that are used to lock and unlock your vehicle. The batteries are able to last for and eventually die. It is a common problem in all vehicles. The good thing is that you can replace the battery in most key fobs, and not have to replace the entire case. You can buy fobs replacements on Amazon that include all the electronics already installed, so you can simply open the case and replace those batteries that are old. You'll need to remove the emergency key before you replace the batteries. To do this, place an small screwdriver with a flat head into the slot in the middle. The case will split as you rotate the screwdriver around it.

If you're ready to replace your keys, keep a spare on hand. This will save you a lot of money. If you have a spare, you can have the dealer cut an additional key and program it to your car, which is cheaper than replacing the whole key fob.

If you don't have a spare one, you can add another key to your car, but this will require a lot of research and effort. It costs a few hundred dollars to add a second car key. The computer of the vehicle also has to be programmed. This can be done by a professional, but it's a costly option for most owners.

Replacement Ignition

The latest SAAB 9-3 has an alarm system that is more sophisticated that is based on a key code. This means that in the event that you lose your only working key, replacing it with another one can be very expensive because the car needs to have a unique computer module installed and it must also be specifically programmed to accept a new key. Dealers can even charge hundreds of dollars to program a new key in the event that they are unable to complete the task.

If you've lost your only working key, a dealer will repair your car's computer (known as the CIM or SAAB TWICE) to create an exchange, and they will charge you the highest price for it. Instead, we can reprogram the EEPROM on your existing car computer, preparing it for an additional key, saving you over 50% of the price you pay at a dealership.

If you've been a long-time owner of an 03-11 SAAB 9-3, then you probably know that the ignition key isn't very durable. They can become incredibly sticky and the buttons are known to fall off of them occasionally, so you should consider buying a new one if the one you have isn't functioning properly. It's good to know that replacing the ignition key isn't as difficult as it seems and can be done quickly using the appropriate tools.