Pengguna:FriedaFiedler5
Ghost Immobiliser Installation
Install a ghost immobiliser on your car to safeguard it from thieves. Our TASSA confirmed system safeguards vehicles from hacking, key cloning, and vehicle immobiliser bypass.
The system is hidden inside the wiring loom of your vehicle It is inaccessible to anyone who is looking. It operates by creating a pin code push sequence through buttons already present on the steering wheel doors, door cards, and the center console.
No circuit cuts
A car is a prized possession that you spend hours of work to get, which is why owners want to protect their vehicle against theft. Traditional security devices, like alarms or wheel locks can be easily bypassed by thieves. installing ghost immobiliser immobilisers are highly-effective solution that operates silently and can't be recognized by modern day thieves.
A ghost immobiliser is a hidden device that connects to the CAN data network in your vehicle to shut down the engine without the use of radio frequencies or key fobs. It communicates with the vehicle's ECU via buttons already on the steering wheel, dash and door panels to generate a unique pin code that only you are aware of. The code can be changed at any time and can contain up to 20 numbers based on your preference. It also comes with an emergency code that you could use in the event of forgetting your PIN.
The ghost immobiliser can be used to stop relay boxes from transferring your car key's signal from inside your home, which would open the doors and begin the vehicle. It can also block advanced methods of stealing your vehicle, like OBD port hacking. The device is small and weatherproof, so it's difficult to detect and is also difficult to alter with.
Another advantage of the ford fiesta ghost installer immobiliser is that it can be fitted in your car without any permanent marks. It is ideal for those who plan to sell their vehicle in the near future. It's also faster and more simple to install when compared to a factory-fitted model.
The Autowatch Ghost, a groundbreaking new-generation device, prevents thefts from cars that are not connected to a vehicle's CAN network and using the existing buttons to generate an unique PIN code. This is a stealthy device that can be installed with no wires cut and does not require additional key fobs. It also connects to the vehicle's original ECU and prevents thieves from bypassing it by using an additional key or replacing the ECU with an "relay". This system is TASSA verified and can be linked to an International Security Register, allowing owners to have peace of mind knowing their vehicles are secure from theft.
No RF scanning
If you've put a lot of time and money into the customisation of your vehicle, you'll need to secure it from theft. One method to do this is to install an immobiliser. It will stop the engine from starting until you enter a unique PIN. You can create a 20-digit pin using the buttons on your dashboard or the steering wheel. This will ensure that only you have the right to drive your vehicle. It is also possible to set up a service or valet mode that allows you to start your car for a short period without having to enter the PIN code. This will allow your technician to work on your car without you being present. This feature is great for those who wish to reduce time and make their lives easier.
Ghost immobilisers, which are new generation device connects to the CAN data network of your vehicle and uses buttons on the dashboard and steering wheel to program a PIN code. It is designed to blend in, as it does not emit any sound or light indicator. It can be put in anywhere on your vehicle, without impacting the appearance of your vehicle.
This stealthy device is TASSA approved and can cut down on the cost of insurance. It has a tracking feature that allows you to locate your vehicle even if it's been stolen. This is helpful if you have a costly or rare vehicle that you have invested lots of time personalising.
Autowatch Ghost, in conjunction with the iPhone application allows you to remotely start your vehicle if you have forgotten your PIN or are not able to enter your vehicle. This feature is ideal for those who need to go on errands or pick up your kids, but do not want to let someone else drive your car. It can also be helpful if you need to take your vehicle to a mechanic for maintenance or repair.
The Ghost is unique in that it does not transmit or detect radio frequency, so it is undetectable by thieves who use RF scanning and code grabbing techniques. It can also safeguard your car from key cloning and ECU swapping as well as other typical methods of theft from cars.
There is no key to cloning
Ghost immobilisers are a fantastic option for protecting expensive vehicles. They are designed to stop key replication. They prevent your vehicle from being started until a PIN code has been entered with the regular key fob. This makes it difficult for thieves to take your vehicle and can also stop them from trying it initially. This is a good idea in the event that your vehicle has been heavily modified or is rare.
The immobilisers are connected to the vehicle's onboard CAN data network and are completely hidden meaning that there is no visible indication of its presence within the vehicle. It is also impossible for a thief to identify the device using radio frequency scanning or code technology for grabbing. This means that a thief must spend longer in order to successfully get your car.
To bypass the system a thief must be aware of the pin code and the location of the Ghost. The pin code is unique to you and you can change it as many times as you want. The pin code you select is simple to remember, but mathematically difficult for anyone else to understand. Additionally the engineer will provide you with an emergency pin code override in case you forget the pin.
The Ghost CAN Bus immobiliser could be installed in a matter of minutes on your vehicle. It is compatible with all vehicles and fully customisable to match the style of your car. It is also affordable and simple to use. You can even transfer the device to another vehicle if you decide to change vehicles in the course of ownership, as long as the new vehicle is compatible with it.
The CAN bus can be used with other security features. For instance, it can detect damage to your vehicle and notify the owner. It can also stop the engine if the car is tampered with. It also helps protect your vehicle from key cloning and hacking. It can also detect vibrations or contact with the vehicle. It can also notify the owner if the vehicle is moving.
No OBD port hacking
Ghost utilizes a hidden module that is connected to the CAN data network of your vehicle. This prevents a thief trying to hack into your vehicle to disable your alarm, disable your key fob, and create new keys. This technology is a significant improvement over the traditional methods employed by thieves to steal vehicles in the past. The CAN data network means that the system will not be affected by disconnecting or replacing your battery.
The Autowatch Ghost is the first aftermarket CAN bus non-detectable immobiliser that protects against key-cloning, hacking, and theft of replica cars. It doesn't use LED indicators or key-fobs. Instead, it relies on the buttons on your steering wheel, console, and door panels.
Modern thieves can use diagnostics to detect circuit breakages in your vehicle. They can bypass immobilisers which require a large amount of wiring or are integrated into the wiring. The Ghost is weatherproof, does not require additional wiring and cannot be detected by diagnostic tools of a professional. It can even be fitted on vehicles that are fitted with anti-theft devices.
Another benefit of the Ghost immobiliser is that your vehicle can only be started by a person who knows the PIN code and has physical access to your vehicle. This is an advantage over traditional security systems which can be bypassed by simple screwdrivers or cable tampering.
You can easily reset your PIN if forget it using the emergency PIN override feature on your mobile or computer. This is helpful if you need to start your car when it's left in a garage or at valet parking.
The Autowatch Ghost 2 is the latest version of the product, and is insurance approved by TASSA when installed by one of our authorised installers. It features a QR fingerprint system to identify specific parts, which allows for the return of stolen items in the event that they are discovered. It can also be switched to'service mode', which allows the engine to be started when your vehicle is in a garage, or if you have valet parking, however, you'll need to enter your PIN again to exit the vehicle.
